公司新聞
產品
聯系嘉瑞杰
山東嘉瑞杰機械科技有限公司
聯系人：王經理
電話：0531-88670722
手機 : 15866677695
地址：濟南市天橋區梓東大道鑫茂科技城143號樓102室
快速成型的特點以及基本的原理
來源：http://www.lqjg.cn作者：山東嘉瑞杰機械科技有限公司發布時間：2022-11-26
快速成型技術是在計算機控制下，基于離散、堆積的原理采用不同方法堆積材料，完成零件的成形與制造的技術。下面來講講山東快速成型的特點以及基本的原理。
Rapid prototyping technology is a technology that uses different methods to stack materials based on the principle of discrete and stacking under the control of computer to complete the forming and manufacturing of parts. Now let's talk about the characteristics and basic principles of Shandong rapid prototyping.
特點
characteristic
1、制造原型所用的材料不限，各種金屬和非金屬材料均可使用；
1. There is no limit to the materials used to manufacture the prototype, and all kinds of metal and non-metallic materials can be used;
2、原型的復制性、互換性高；
2. High reproducibility and interchangeability of prototypes;
3、制造工藝與制造原型的幾何形狀無關，在加工復雜曲面時更顯優越；
3. The manufacturing process is independent of the geometric shape of the manufacturing prototype, which is superior in machining complex surfaces;
4、加工周期短，成本低，成本與產品復雜程度無關，一般制造費用降低50%，加工周期節約70%以上；
4. The processing cycle is short, the cost is low, and the cost has nothing to do with the product complexity. The general manufacturing cost is reduced by 50%, and the processing cycle is saved by more than 70%;
5、高度技術集成，可實現了設計制造一體化。
5. High technology integration, which can realize the integration of design and manufacturing.
基本原理
Fundamentals
1、從成形角度看，零件可視為“點”或“面”的疊加。從CAD電子模型中離散得到“點”或“面”的幾何信息，再與成形工藝參數信息結合，控制材料有規律、精確地由點到面，由面到體地堆積零件。
1. From the forming point of view, the part can be regarded as the superposition of "points" or "faces". The geometric information of "point" or "face" is obtained from the discrete CAD electronic model, and then combined with the information of forming process parameters to control the material to accumulate parts from point to face and from face to body regularly and accurately.
2、從制造角度看，它根據CAD造型生成零件三維幾何信息，控制多維系統，通過激光束或其他方法將材料逐層堆積而形成原型或零件。
2. From the perspective of manufacturing, it generates 3D geometric information of parts according to CAD modeling, controls multidimensional systems, and stacks materials layer by layer through laser beam or other methods to form prototypes or parts.
快速成型的特點以及基本的原理相關內容就講解到這里了，您對此有什么不明白的地方歡迎來聯系我們http://www.lqjg.cn隨時咨詢了解！
The characteristics and basic principles of rapid prototyping are explained here. If you have any questions, please contact us http://www.lqjg.cn Please consult at any time!
相關資訊
手板制作加工時注意事項
2024-04-11手板加工如何服務好客戶?
2024-04-09手板加工的過程及方式
2024-04-06快速成型的基本原理構成有哪些？
2024-02-27工業產品設計中常見手板件的制作方式
2024-02-23ABS手板模型的優勢有哪些？
2024-02-21鋁合金手板模型制作手法與維護
2024-02-10鋁合金手板模型的氧化工藝介紹
2024-02-10汽車手板模型制作的低壓灌注工藝
2024-02-06手把手教你怎么選機箱機柜定制工廠
2024-01-27
